3DPRINTERLLC DIY DLP 3D Printer Designed for Jewelry and Dentistry Made for Digital Light Processing 3D Printing

3DPRINTERLLC 3D Printer Double Head EXtruder & Nozzle Kits, also called 3DPRINTERLLC Quick Disassembly Replacement Nozzle Kits. Each kits requires only 4 screws to replace the entire nozzle and extruder kits.

We have developed the DMP 3D printing system ourselves, and DMP stands for Dual Material Printing or Duplication & Mirror Printing. It can move 7-axis at the same time and has the firmware collision avoidance function of running two nozzles efficiently. Our self-developed TENLOG® Multi Nozzle 3D Printer Motherboard has a 7-axis motion control system. The 3DPRINTERLLC motherboard can work for 500 hours without interruption. The motherboard firmware is based on marlin 1.0.x and is open source. You can buy it to make a spare part for 3DPRINTERLLC Dual Extruder 3D Printer.

The ball slides slide smoothly and have a long service life and easy maintenance. Only regular grease or lubricant is required.

3DPRINTERLLC DMP 7-axis Motherboard (Version 2) Support both A4988 & TMC2208 Driver Each Small Motherboard Enjoy a Fan Add 1 More Fan than the Version 1 The Version 1 and 2 Motherboard Use the Same Firmware You Can Only Use the Same Motherboard as Your Current Host, the Wrong Version Will Lose the Warranty!

Hands 2 IDEX 3D Printer, the smallest Independent Dual Extruder 3D Printer from 3DPRINTERLLC 3D Never Lose Hand, Powerful for Your Creation! The Really Multi Color 3D Printer! Printing good Multi Color objects. All in One Connector, collect all interfaces of extruder, hot end, temperature sensor, two fans, and break sensor. Extruder & Nozzles Kits is designed for quick disassembly and installation, very easy to change.

4.3-inch full color touch screen

We have developed the DMP 3D printing system ourselves, and DMP stands for Dual Material Printing or Duplication & Mirror Printing. It can move 7-axis at the same time and has the firmware collision avoidance function of running two nozzles efficiently. Our self-developed TENLOG® Multi Nozzle 3D Printer Motherboard has a 7-axis motion control system. The 3DPRINTERLLC motherboard can work for 500 hours without interruption. The motherboard firmware is based on marlin 1.0.x and is open source. You can buy it to make a spare part for 3DPRINTERLLC Dual Extruder 3D Printer.

3DPRINTERLLC TL-D6 Best Dual Extruder 3D Printer It reaches the maximum limit of the frame printer. Super Large Format building volume is 600*mm*600mm*600mm. It has 2 Z-axis metal levers to reduce a lot of sway and make the printing platform more stable during printing. Compared with the all-metal double nozzle, it brings a super low price. It is a cheap double-nozzle large printer but it runs stably and the printing object has high precision.